Configuring the redBorder client proxy in redBorder Live 

After completing the guide on how to install and register the redBorder client proxy, the next step is to configure it.

In order to configure the sensor in redBorder Live, you must have a redborder account. Then you must access here and click on Create a new redBorder live account. 

Fill out the form and click on Register. You will need to confirm the email in order to finish the process. 

Now, you must go the RedBorder Live login page. You will log in with the same email address and password that you used in the registration. 

Now you can create a Claim Sensor in Redborder LIVE or Visualizer. The process is the same, and in this case, the demonstration will be done on LIVE.

Therefore, you must go to LIVE:

Go to Sensors and press +Add Sensor and +Claim Sensor:

A pop-up window will appear where you must enter a name for the sensor and paste the UUID that you copied before in the field below. 

Click on  save and wait between 5-10 minutes until the sensor is configured correctly.

You must wait a few minutes to get a green indicator, and then, you can verify that the sensor is working in RedBorder Live. 

Sensor registered and claimed.